IBM System x3650 M5 Installation And Service Manual page 379

40000087-00000000 Manual Call Home by user [arg1]: [arg2].
Explanation: Manual Call Home by user.
May also be shown as 4000008700000000 or 0x4000008700000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0135
SNMP Trap ID:
Automatically notify Support: Yes
User response: IBM Support will address the problem.
40000088-00000000 Management Controller [arg1]: Configuration restoration from a file by user [arg2] completed.
Explanation: This message is for the use case where a user restores a Management Controller configuration from a
file and it completes.
May also be shown as 4000008800000000 or 0x4000008800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0136
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000089-00000000 Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to
complete.
Explanation: This message is for the use case where a user restores a Management Controller configuration from a
file and the restoration fails to complete.
May also be shown as 4000008900000000 or 0x4000008900000000
Severity: Error
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0137
SNMP Trap ID: 22
Automatically notify Support: No
User response:
1. Turn off the server and disconnect it from the power source. You must disconnect the server from ac power to
reset the IMM.
2. After 45 seconds, reconnect the server to the power source and turn on the server.
3. Retry the operation.
40000087-00000000 • 40000089-00000000
Appendix A. Integrated management module II (IMM2) error messages
363