Table of Contents
Advertisement
Problem Solving
Problems Relating to Images
No images appear
Check
Did you press the [
] button on the remote control or the [t]
button on the control panel?
Are the indicators switched off?
Is A/V Mute active?
Are the Configuration menu settings correct?
Is the image to be projected completely black?
(Only when projecting computer images)
Is the image signal format setting correct?
(Only when projecting images from a video source)
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?
Press the [
] button on the remote control or the [t] button on the control panel to turn on the projector.
The power cord is not connected correctly or power is not being supplied.
Connect the projector's power cord correctly.
Check that your electrical outlet or power source is functioning correctly.
Press the [A/V Mute] button to release A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
Reset all of the settings.
s Reset - Reset All
p.122
Some input images, such as screen savers, may be completely black.
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal
p.109
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Remedy
p.90
Remedy
134
Advertisement
Table of Contents
