Adjusting Projected Images
Correcting Distortion in the Projected Image
You can correct keystone distortion in projected images using one of the
following methods.
• H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
"H/V-Keystone"
p.52
s
• Quick Corner
Manually correct the four corners independently.
"Quick Corner"
p.53
s
• Curved Surface
Manually correct distortion that occurs when projecting on a curved
surface, and adjust the amount of expansion and contraction.
"Curved Surface"
p.54
s
• Point Correction
Corrects slight distortion which occurs partially, or adjusts the image
position in an overlapping area when projecting from multiple projectors.
"Point Correction"
p.61
s
51