Table of Contents
Advertisement
Adjusting Projected Images
f
Use the [
], [
], [ ], and [ ] buttons to adjust the shape.
If the triangle in the direction you are adjusting the shape turns gray,
as shown in the screenshot below, you cannot adjust the shape any
further in that direction.
g
Press the [Esc] button to return to the previous screen.
h
Repeat procedures from 5 to 7 as needed to adjust any remaining
parts.
If the image expands and contracts, go to the next step and adjust
the linearity.
i
Press the [Esc] button to display the screen from step 4. Select
Horizontal Linearity or Vertical Linearity, and then press the [
button.
Select Horizontal Linearity to adjust the horizontal expansion or
contraction, and select Vertical Linearity to adjust the vertical
expansion or contraction.
j
Select the standard line for the adjustments, and then press the
[
] button.
Use the [ ][ ] buttons when selecting the Horizontal Linearity,
and the [
][
] buttons when selecting the Vertical Linearity, and
then press the [
] button.
The selected standard line is displayed in flashing red and white.
60
]
Advertisement
Table of Contents
