Table of Contents
Advertisement
Problem Solving
Images appear dark
Check
Is the image brightness set correctly?
g
Is the Contrast
adjusted correctly?
Is it time to replace the lamp?
Is only one projector being used?
Problems when Projection Starts
The projector does not turn on
Check
Did you press the [
] button on the remote control or the [t]
button on the control panel?
Are the indicators switched off?
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
Check the Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness
p.107
s Settings - Power Consumption
p.110
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast
p.107
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s "Replacing the Lamp"
p.148
Check if the following items are set to dark.
s Extended - Multi-Projection - Brightness Level
s Extended - Multi-Projection - Multi-screen
Press the [
] button on the remote control or the [t] button on the control panel to turn on the projector.
The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
Check that your electrical outlet or power source is functioning correctly.
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Remedy
p.112
p.112
Remedy
139
Advertisement
Table of Contents
