Table of Contents
Advertisement
Problem Solving
Problems Relating to Images
No images appear
Check
Did you press the [
] button on the remote control or control
panel?
Are the indicators switched off?
Is A/V Mute active?
Are the Configuration menu settings correct?
Is the image to be projected completely black?
(Only when projecting computer images)
Is Windows Media Center displayed in full screen?
(Only during network connection)
Is an application using the Windows DirectX function displayed?
(Only during network connection)
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?
Press the [
] button to turn on the power.
The power cord is not connected correctly or power is not being supplied.
Connect the projector's power cord correctly.
Check that your electrical outlet or power source is functioning correctly.
Press the [A/V Mute] button to release A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
Reset all of the settings.
s Reset - Reset All Config
p.146
Some input images, such as screen savers, may be completely black.
When Windows Media Center is displayed at full screen, you cannot project using a network connection. Reduce the
screen size.
Applications using the Windows DirectX function may not display images correctly.
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Remedy
p.108
Remedy
171
Advertisement
Table of Contents
