Table of Contents
Advertisement
List of Functions
Submenu
Set to On to send an email to the preset addresses when a problem
Mail Notification
or warning occurs with a projector.
SMTP Server
You can input the IP Address
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
You can input the port number for the SMTP server. The default
Port Number
value is 25. You can input numbers between 1 to 65535.
Function
g
for the SMTP server for the
Submenu
Address 1 Set-
You can input the email address of the destination to send the
ting/Address 2
notification email to. You can register up to three destinations.
Setting/Address
You can enter up to 64 single-byte alphanumeric characters for
the email addresses. ( " ( ) , ; < > [ ¥ ] cannot be used.)
3 Setting
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.161
You can select the problems or warnings to be notified about by
email. When the selected problem or warning occurs in the
projector, an email is sent to the specified Email Address
notifying that a problem or warning has occurred. You can select
multiple items from the displayed items.
The address for destination 1 is the mail notification sender's
address.
119
Function
Advertisement
Table of Contents
