Changing The Direction Of The Image (Projection Mode); Screen Settings - Epson EB-G6970WU User Manual

Installing the Projector
d
When you have finished making settings, use the [
select Set, and then press the [

Changing the direction of the image (projection mode)

You can change the direction of the image using Projection mode from the
Configuration menu.
Extended - Projection p.112
s
When Front is the standard, the image directions for each projection mode
are as follows.
Front (default)
Rear
] button to
] button.
Front/Ceiling
Rear/Ceiling
a
• You can change the setting as follows by pressing down the [A/V
Mute] button on the remote control for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
• Make sure you check the Direction setting when you change the
projector's installation position.
s Extended - Direction

Screen Settings

Set the Screen Type according to the aspect ratio of the screen being used.
The area where the image is displayed matches the shape of the screen.
a
The settings for the Screen Type at the time of purchase are as
follows:
• EB-G6970WU: 16:10
• EB-G6870: 4:3
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
b
Select Display from Extended.
c
Select Screen Type from Screen.
d
Select the screen's aspect ratio.
The shape of the background test pattern changes depending on the
setting.
p.112
p.105
27