Network Menu - Epson EB-G6970WU User Manual

List of Functions
Submenu
HDBaseT Control Communications: (This cannot be set when
Extron XTP is set to On.) When set to On, Ethernet
communication, serial communication, and the wired
remote control through the HDBaseT Transmitter connected
to the HDBaseT port are all enabled. (When this is enabled,
the projector's LAN port, RS-232C port, and Remote port
are disabled.)
Extron XTP: Set to On when you connect the Extron XTP
transmitter or switcher to the HDBaseT port. See the
following Extron Web site for more details on the XTP
system.
http://www.extron.com/
a
Multi-Projection Make settings when projecting from multiple projectors.
s "Multi-Projection Function"
Brightness Level: When the brightness of each lamp differs,
set the lamp brightness level between 1 and 5. This item can
be adjusted only when Power Consumption is set to
Normal from the Settings menu.
Edge Blending: Corrects a border between multiple images
to create a seamless screen.
s "Adjust the Edges of the Images (Edge Blending)"
p.80
Multi-screen: You can adjust the tint and brightness of each
projected image.
s "Adjusting to Match Colors"
Projector ID: Set the ID from 1 to 9. Off indicates that no
ID is set.
s "ID Settings"
You can set the projector's schedule so that it performs a
Schedule Set-
specific operation at a pre-scheduled time.
tings
s "Scheduling Function"
Function
When Extron XTP is set to On, the fan
may rotate in standby mode but this is not
abnormal.
p.79
p.84
p.34
p.96
Submenu
Language You can set the language for messages and menus.
You can reset all adjustment values for the Extended menu
Reset
to their default settings. However, the following items are
not reset.
Screen Type, Screen Position, Projection, Direction, High
Altitude Mode, Remote Control Type, Inv Direction
Button , Startup Source Search, A/V Mute Release, Lens
Type, A/V Output, Monitor Out, Standby Mode, Control
Communications, Extron XTP, Multi-screen, Projector ID,
and Language
See the following to return all menu items to their default
settings.
s "Reset Menu"
* When User's Logo Protection is set to On in Password Protection, you
cannot change settings related to user's logo. You can make changes after
setting User's Logo Protection to Off.
s "Managing Users (Password Protection)"

Network Menu

When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
"Setting Password Protection"
s
Function
p.122
p.99
p.99
115