Table of Contents
Advertisement
List of Functions
Submenu
Geometric Cor-
You can correct distortion.
rection
s "Correcting Distortion in the Projected Image"
• H/V-Keystone:
Adjust V-Keystone and H-Keystone to correct vertical
and horizontal keystone distortion.
• Quick Corner:
Select and correct the four corners of the projected image.
• Curved Surface:
Corrects distortion that occurs when projecting on a
curved surface.
• Point Correction:
Divides the projected image into a grid and corrects the
distortion by moving the selected point of intersection
from side to side and up and down.
• Corner Wall:
Corrects distortion that occurs when projecting on a
surface with right angles.
Split Screen
You can split the screen into two screens.
s "Projecting Two Images Simultaneously (Split Screen)"
p.87
You can use this to restrict operation of the projector's
Control Panel
Lock
control panel.
s "Control Panel Lock"
When set to Normal, the lamp is at its brightest.
Power Con-
sumption
When set to Temp Interlock, if the surrounding
temperature
control the operating temperature.
When set to ECO, the power consumption during
projection drops and the fan noise is reduced.
You can adjust the volume for audio output from the Audio
Volume
Out port. Setting values are saved for each source.
Function
p.101
*
gets too high, the lamp automatically dims to
Submenu
Remote Receiv-
er
p.51
User Button
Test Pattern
Memory
Reset
*
Operating temperature of +40˚C at an altitude of 0 to 1,499 m, and +35˚C at
an altitude of 1,500 to 3,048 m.
Function
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from
the remote control. If you want to make operations from
the remote control, hold down the [Menu] button on the
remote control for at least 15 seconds to reset the setting to
its default value.
Select the items in the Configuration menu that you want to
assign to the [User1], [User2], and [User3] buttons on the
remote control. The following items can be assigned.
Power Consumption, Info, Progressive, Geometric
Correction, Multi-Projection, Resolution, Memory, or
Image Processing
You can display a test pattern to adjust the projection
without connecting other equipment when you set up the
projector.
s "Displaying a Test Pattern"
p.28
Perform operations and make settings for the memory
function.
s "Memory Function"
p.94
You can reset all adjustment values on the Settings menu to
their default settings, except for User Button and
Memory.
See the following to return all menu items to their default
settings.
s "Reset Menu"
p.122
111
Advertisement
Table of Contents
