Problems Relating To Images; No Images Appear - Epson EB-590WT User Manual

Problem Solving

Problems Relating to Images

No Images Appear

Check
Did you press the [t] power button?
Are all of the indicators off?
Is A/V Mute active?
Are the Configuration menu settings correct?
Is the image to be projected completely black?
(Only when projecting computer images)
Is the image signal format setting correct?
(Only when projecting images from a video source)
Is the USB cable connected correctly?
(Only when projecting USB Display)
Is Windows Media Center displayed in full screen?
(Only when projecting using USB Display or network connection)
Is an application using the Windows DirectX function displayed?
(Only when projecting using USB Display or network connection)
Is Monitor Out Port set to Monitor Out?
Press the [t] power button to turn the power on.
The power cord is not connected correctly or power is not being supplied.
Connect the projector's power cord correctly.
s "Getting Ready to Project" p.45
Check the breaker and so on to ensure power is being supplied.
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
Reset all of the settings.
s Reset - Reset All p.146
Some input images, such as screen savers, may be completely black.
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.129
Check that the USB cable is connected correctly. Reconnect it if it is not connected or not connected properly.
When Windows Media Center is displayed at full screen, you cannot project using USB Display or network connection.
Reduce the screen size.
Applications using the Windows DirectX function may not display images correctly.
When projecting images from the Monitor Out/Computer2 port, set the Monitor Out Port to Computer2 from the
Configuration menu.
s Extended - Operation - Monitor Out Port
Remedy
p.102
p.132
155