Points Of Concern When Bringing In An Expansion Rack - Fujitsu M10 Installation Manual

Figure 2-12 Bottom view of an expansion rack, Unit: mm (in.)
2.4.6 Points of concern when bringing in an expansion
rack
This section describes the points of concern when an expansion rack or the server
product is brought in.
Before bringing in an expansion rack, confirm that the access route is wide enough
■
for the rack package (Eco package: W 700 x D 1,050 x H 2,000 mm, ordinary
package: W 1,260 x D 1,264 x H 2,160 mm).
The expansion rack is shipped with both the SPARC M10-4S and crossbar boxes
mounted in the rack. If it is difficult to bring in the rack while still packed, unpack
it as needed to bring it in.
If the access route has steps, a ramp may be necessary.
■
Front of the device
Caster
577.2(22.7)
350(13.8)
95
(3.7)
Level foot
577.2(22.7)
350(13.8)
95
(3.7)
Chapter 2 Planning and Preparing for System Installation 35