Chapter 2 Planning And Preparing For System Installation; Safety Precautions - Fujitsu M10 Installation Manual

Chapter 2
Planning and Preparing for System
Installation
This chapter describes what should be checked when planning SPARC M10 system
installation. Before installation, you need to understand the system configuration and
obtain all the information that will become prerequisite conditions for installation.

Safety Precautions

■
Items Requiring Confirmation before Installation
■
Confirming the Physical Specifications of the System
■
Confirming Rack Specifications
■
Checking Environmental Conditions
■
Checking Acoustic Noise Levels
■
Checking Cooling Conditions
■
Checking the Power Input Type
■
Preparing Power Supply Facilities
■
Checking External Interface Port Specifications
■
2.1 Safety Precautions
This section describes precautions regarding installation of the SPARC M10 systems.
Be sure to follow the precautions below when performing installation work. Failure
to do so may lead to damage to the device or a malfunction.
Follow all the stated precautions, warnings, and instructions for the chassis.
■
Do not insert any foreign object into the chassis openings. Any object that touches
■
a high-voltage part or causes a component to short circuit may lead to fire or
electric shock.
Contact a service engineer for details of chassis inspection.
■
Safety precautions when working with electricity
Verify that both the voltage and frequency of input power match the voltage and
■
17