Fujitsu M10 Installation Manual page 39

Table 2-3 Third-party rack checklist
Description
Rack type/Compliance
standards
Dimension between rear door
(inside) and front column
Dimension between front door
(inside) and front column
Dimension between front and
rear columns
Dimension between rear door
(inside) and rear column
Front panel mounting space of
chassis
Distance between left and right
chassis attachment holes
(common to front and rear
columns)
Distance between left and right
columns (common to front and
rear columns)
Column thickness
Structures other than columns
Cable hatch
Area of door vent openings
Condition
Equipment rack/EIA standard-compliant
SPARC M10-1: At least 917 mm (36.1 in.)
SPARC M10-4: At least 844 mm (33.2 in.)
SPARC M10-4S: At least 930 mm (36.6 in.)
PCI-BOX: At least 848 mm (33.4 in.)
SPARC M10-1: At least 40 mm (1.5 in.)
SPARC M10-4: At least 32 mm (1.3 in.)
SPARC M10-4S: At least 32 mm (1.3 in.)
PCI-BOX: At least 24 mm (0.9 in.)
Within adjustment range of rack mount kit
Adjustment range of the mount kit for each server
SPARC M10-1:
612 mm (24.1 in.) to 925 mm (36.4 in.)
SPARC M10-4:
630 mm (24.8 in.) to 840 mm (33.1 in.)
SPARC M10-4S:
630 mm (24.8 in.) to 840 mm (33.1 in.)
PCI-BOX:
630 mm (24.8 in.) to 840 mm (33.1 in.)
SPARC M10-1: No conditions
SPARC M10-4: At least 158 mm (6.2 in.)
SPARC M10-4S: At least 158 mm (6.2 in.)
PCI-BOX: At least 158 mm (6.2 in.)
At least 483 mm (19.0 in.)
465 mm (18.3 in.)
At least 450 mm (17.7 in.)
2 mm (0.08 in.) to 2.5 mm (0.1 in.)
Rack has no structures between front and rear
columns
Rack has hatch on bottom surface, rear door, or
elsewhere
Front door: At least 73 % of door area
Rear door: At least 73 % of door area
Chapter 2 Planning and Preparing for System Installation
Letter in
figure
--
A
B
C
D
E
F
G
H
I
J
K
25