Connecting Xscf Cables - Fujitsu M10 Installation Manual

Figure 4-18 Connector indication example of a crossbar cable
(BB00...BB15) - (XBU0...XBU1) - (0L,0R...2L,2R)
XBU number
(BB80...BB83) - (XBU0...XBU2) - (L0,R0...L7,R7)
Note - The connector label shows both the cable connection destination and the unit
connected by the cable.
4.3.3

Connecting XSCF cables

Cables that pass between racks are secured to expansion rack 2. Connect cables to
their respective ports on expansion rack 1 through the empty space in the connecting
part of the racks.
For the cable routes, see
When laying the cables, use the supplied hook-and-loop fastener strips to bundle
them as appropriate.
1.
Pass the XSCF BB control cables stored in expansion rack 2 through the
upper side of the connecting part of the racks (B in
2.
Connect the XSCF BB control cables.
Connect the cables such that the port indications on each chassis match the labels
on the cables.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
158
BB00 XBU0
XBU2
XB82
BB number XBU number
XBU number
Figure
2L
L0
Connector position
Connector position
4-19.
Figure 4-14).