Fujitsu M10 Installation Manual page 122

Note - After removing its screw, hold the rail level with both hands. If the rail tilts, it may
stretch.
Figure 3-43 Attaching the rail: Locations of protrusions
Mounting
area (4U)
Figure 3-44 Attaching the rail: Fixing location of the screw
2U bottom
7.
Attach the cable support fixing brackets to the rear supporting columns of the
rack.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
108
2U top
1U top
1U bottom
FRONT FRONT
FRONT
FRONT
Mounting
area (4U)
REAR
REAR