Pc Keyboard Wedge Interface Selection - PSC PowerScan Programming Manual

This section contains the following PC Keyboard Wedge communication
parameters in the order listed:
Keyboard Wedge Communication Parameters
• Interface Selection
• Connect to Laptop
• Caps lock Settings
• Country Modes
• Intercharacter Delay
Go to the sections titled Symbology Selection and General Features in the
back of this programming guide if you want to change any other settings.

PC Keyboard Wedge Interface Selection

The scanner supports a variety of PC Keyboard Wedge interfaces. The
table below defines the different interface selections.
I/F Type
A PC/XT w/Alternate Key Encoding
B AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alternate Key
Encoding
C PS/2 25 and 30 w/Alternate Key Encoding
D PC/XT w/Standard Key Encoding
E AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Standard Key
Encoding
F PS/2 25 and 30 w/Standard Key Encoding
G IBM 3xxx w/122 keyboard
H IBM 3xxx w/102 keyboard
I PS/55 5530T w/104 keyboard
J NEC 9801
We recommend that you disconnect power before plugging/
unplugging cables to avoid any possibility of equipment damage.
R44-1840
If the transmission parameters are con-
figured such that a label results in no
actual data to send, the label will be ac-
cepted, beeped, and no data transmitted.
NOTE
PCs Supported
NOTE
29