Where To Go From Here - PSC PowerScan Programming Manual

Where To Go From Here

Programming is easy and straightforward if you follow these steps:
1. If you are changing the scanner's interface type, follow the
instructions earlier in this section titled, Changing Interfaces,
before proceeding.
2. Scan any feature bar codes that are unique to the interface you
are currently programming. These interface specific program-
ming bar codes immediately follow each interface selection label.
3. Turn to the Symbology section if you are going to change any
bar code symbologies or modify any symbology related features.
4. Turn to the General Features section of this guide if you wish to
change or modify any of the scanner's other features.
Once the necessary changes have been made, and you have scanned the END
bar code, you are ready to scan.
12
If you are changing some interface types
(for example; if you are moving the
scanner from a Universal Keyboard
Wedge to an RS-232 host) you must
first change the hardware. Replace the
scanner's interface board (if required)
and connect the scanner using the new
interface cable BEFORE performing any
programming changes.
NOTE
PowerScan ™ Programming Guide