Code 93 Options; Code 93 Minimum Length - PSC PowerScan Programming Manual

Code 93 Options

Follow these steps to set Code 93 Minimum Label Length:
1. Identify the minimum length setting you want to make. The
selectable range is 01 to 50
2. Scan the SET label.
3. Scan the SET C93 MINIMUM LABEL LENGTH bar code.
Setting Lengths
If you are setting a length less than ten, you must scan a zero first and
then the length digit ( 04, 06, 08).
4. Set the minimum label length by scanning the correct digits
from below and the next page.
5. Scan the END label.
SET --------------------------------------
S
ET
0 ------------------------------
1 ------------------------------
2 ------------------------------
1 For this symbology, the scanner will decode up to 50 characters, but the actual length read
will vary depending upon interface type, and bar code physical size and quality. The IBM
POS interface is limited to 32 character labels. Code 93 bar codes containing one or more
shift characters can also limit the amount of characters that will be decoded (in these
circumstances, the scanner will decode at least 39 data characters).
90

Code 93 Minimum Length

C93 M L
INIMUM ABEL
1
characters.
L ------
ENGTH
PowerScan ™ Programming Guide