Rs-232 Interface Selection; Sni Rs-232 Interface Selection - PSC PowerScan Programming Manual

RS-232 Interface Selection

Scan this label to enable the standard RS-232 interface (PSC RS-232).

SNI RS-232 Interface Selection

Scan this label to enable the SNI RS-232 interface.
SET --------------------------------------
E
NABLE
E
NABLE
END --------------------------------------
16
If your scanner is a HIGH DENSITY model,
it may not be able to read the RS-232
interface selection bar codes above. If
so, use these bar codes instead.
S RS-232 -
TANDARD
SNI RS-232 -------
NOTE
PowerScan ™ Programming Guide