Pc Keyboard Wedge – Connect To A Laptop/No Keyboard Attached - PSC PowerScan Programming Manual

PC Keyboard Wedge – Connect to a Laptop/No Keyboard Attached

If no keyboard is attached, the scanner must provide the acknowledge signal
to the PC. In this case, enable the "Laptop/No External Keyboard" mode. If
a keyboard is attached, enable "Keyboard Attached".
Laptop (integrated keyboard) — Scan the "Laptop/No External Keyboard"
label below when the scanner is connected to a laptop computer or when the
scanner is operated with no external keyboard attached.
PC (external keyboard) — If you move the scanner to a standard PC, change
the setting to "Keyboard Attached".
Send Control Characters — When this feature is enabled, all ASCII charac-
ters except NUL (00h) are transmitted. Disabling this feature limits transmis-
sion of ASCII characters to the following:
• Only ASCII characters between 20h..127h, plus...
- Carriage Return (CR=0Dh)
- BackSpace (BS=08h)
- Right Tab (HT=09h)
- Left Tab (0Bh)
- Esc (1Bh)
SET --------------------------------------
L
APTOP
K
EYBOARD
E
NABLE
D
ISABLE
END --------------------------------------
R44-1840
/N E K
O XTERNAL EYBOARD
A -------------
TTACHED
-----------------------------
----------------------------
31