Input/ Display Confirmation Procedure When Operation The License Management; Requirements For Using License Activation Base Functions; Instruction For Part Replacement - Konica Minolta bizhub C220 Operation Manual

Input/ Display confirmation procedure when operation the license
management
Details about the procedure are described from the next page. You need to execute the
license operation on the LMS/ PC (Web browser)/ MFP panel.
(Image)
MFP
It is possible to input/ display information in the following ways.
Use the printing from MFP.
Display the information on the panel or input the information from panel.
Display the information on the PC. Input the information from (PageScope Web
Connection) or Web browser screen.
* Actual screen may be different from the operation procedure screen in this guidebook.

Requirements for using License Activation Base Functions

You must prepare the followings to use the License Activation Base Functions.
Additional Memory: Additional Memory is included in Upgrade Kit (UK-203).
Token Certificate: Token Certificate is included in License Kit.
(LK-101/102/103/105).
You need to install the OCR Dictionary Data to the MFP.

Instruction for part replacement

If you need replacement of NVRAM or Service EEPROM, please exchange it for new
one.
Issued by BT-CSO
PC
8
for Customer Engineer
LMS
Ver 1.01