Figure 4-10 Wizard Setup : Bridge : RFC 1483 : WAN and LAN Settings
4.16 Wizard Setup : Bridge : PPPoA Encapsulation
Select PPPoA encapsulation in the screen as displayed in Figure 4-9. Configure the fields and click
Next to continue. Type a user name and password assigned by your ISP in the following screen.
Figure 4-11 Wizard Setup : Bridge : Internet Connection with PPPoA
The following table describes the fields in this screen.
Table 4-8 Wizard Setup : Bridge : Internet Connection with PPPoA
LABEL
User Name
Enter the user name exactly as your ISP assigned. If assigned a name in the form
where domain identifies a service name, then enter both components exactly as given.
Password
Enter the password associated with the user name above.
Wizard Setup
Prestige 861H User's Guide
DESCRIPTION
user@domain
4-13