ZyXEL Communications Prestige 861H-G1 User Manual page 128

Prestige 861H User's Guide
FIELD
Location (optional) Enter the geographic location (up to 31 characters) of your Prestige.
Contact Person's Enter the name (up to 30 characters) of the person in charge of this
Name (optional) Prestige.
Domain Name Enter the domain name (if you know it) here. If you leave this field blank,
the ISP may assign a domain name via DHCP. You can go to menu
24.8 and type "sys domainname" to see the current domain name used
by your gateway.
If you want to clear this field just press the [SPACE BAR]. The domain
name entered by you is given priority over the ISP assigned domain
name.
Edit Dynamic DNS Press the [SPACE BAR] to select Yes or No (default). Select Yes to
configure Menu 1.1 — Configure Dynamic DNS (discussed next).
Route IP Set this field to Yes to enable or No to disable IP routing. You must
enable IP routing for Internet access.
Bridge Turn on/off bridging for protocols not supported (for example, SNA) or
not turned on in the previous Route IP field. Select Yes to turn bridging
on, select No to turn bridging off.
1
ILMI The Integrated Local Management Interface (ILMI) provides two-way
exchange of management information between two devices. This
management information is configuration information concerning the
virtual path and channel connection available.
Both devices must contain the same MIB. All SNMP messages use the
community name ILMI.
Select Yes to turn ILMI on, select No to turn ILMI off.
1
Not available at time of writing.
16-2
Table 16-1 Menu 1 General Setup
DESCRIPTION
The Prestige cannot be
configured as a bridge and a router
at the same time.
EXAMPLE
MyHouse
JohnDoe
zyxel.com.tw
No
Yes
No
No
Menu 1 General Setup