Chapter 5 Port Setup; Configured Vs. Actual Vdsl Port Speed; Port Configuration; Figure 5-1 Menu 6 - Ports Setup For Ves-1012 Only - ZyXEL Communications VES-1000 Series User Manual

5.1 Configured Vs. Actual VDSL Port Speed

Configure the maximum speed of an individual VDSL port in this menu. Due to noise and other factors on the
line, the actual speed may not reach the maximum that you specify. See Table 4-C VDSL Mode, Frequency
Ranges and Speeds for the range of speeds you may configure for each VDSL mode.
Enter 6 from the main menu to bring up Menu 6 – Ports Setup.

5.2 Port Configuration

Port type (VDSL or Ethernet) is labeled under Type in menu 6. Enter the port index number to configure it.
This menu only shows the number of ports that are available on your particular VES-1000 Series switch. As an
example, the VES-1008 will show eight available ports and the VES-1012 will show twelve available ports.
5.2.1 VDSL Port Configuration
Select a VDSL port and then press [ENTER] to go to the VDSL port setup menu.
Port Setup
Type
1. VDSL
2. VDSL
3. VDSL
4. VDSL
5. VDSL
6. VDSL
7. VDSL
8. VDSL
9. VDSL
10. VDSL
11. VDSL
12. VDSL
13. Ethernet
14. Ethernet
Enter selection Number :
Figure 5-1 Menu 6 – Ports Setup for VES-1012 Only
Configure your VDSL and Ethernet ports in SMT menu 6.
Menu 6 – Ports Setup
Active User Name
Yes JoeSoap
Yes David
Yes Troy
No John
No ____________
No ____________
No ____________
No ____________
No ____________
No ____________
No ____________
No ____________
Yes Uplink1
Yes Uplink2
VES-1000 Series Ethernet Switch
Chapter 5
Port Setup
5-1