1. Enter 1 in the menu 21 to display Menu 21.1 — Filter Set Configuration.
2. Enter the index number of the filter set you want to configure (in this case 6)
3. Type a descriptive name or comment in the Edit Comments field (for example,
TELNET_WAN) and press [ENTER].
4. Press [ENTER] at the message
21.1.6 — Filter Rules Summary.
5. Type 1 to configure the first filter rule. Make the entries in this menu as shown next.
6. When you press [ENTER] to confirm, the following screen appears. Note that there is only
one filter rule in this set.
Filter Configuration
Figure 23-11 Sample Telnet Filter
Press [ENTER] to confirm or [ESC] to cancel" to open Menu
"
Prestige 861H User's Guide
.
23-11