Dhcp Setup; Ip Pool Setup; Wizard Setup : Routing : Wan And Lan Settings; Figure 4-6 Wizard Setup : Routing : Wan And Lan Settings - ZyXEL Communications Prestige 861H-G1 User Manual

Prestige 861H User's Guide
Table 4-5 Wizard Setup : Routing : Internet Connection with PPPoA
LABEL DESCRIPTION
Click Next to continue to the next wizard screen.
Next

4.11 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the Prestige as a DHCP
server or disable it. When configured as a server, the Prestige provides the TCP/IP configuration for
the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else
the computer must be manually configured.

4.11.1 IP Pool Setup

The Prestige is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64 for the client machines. This leaves 31 IP addresses, 192.168.1.2 to 192.168.1.32
(excluding the Prestige itself which has a default IP of 192.168.1.1) for other server machines, for
example, server for mail, FTP, telnet, web, etc., that you may have.

4.12 Wizard Setup : Routing : WAN and LAN Settings

Verify the settings in the screen shown next. To change the LAN information on the Prestige, click
Change LAN Configurations. Otherwise click Save Settings to save the configuration and skip to
the section 3.13.

Figure 4-6 Wizard Setup : Routing : WAN and LAN Settings

Wizard Setup 4-9