Display Modes - Furuno FAR-28 Series Operator's Manual

1. RADAR OPERATION
1.8

Display Modes

This radar has the following display modes:
• IMO, A type:
• B, C, W type:
Select a display mode as below. Note that a display mode cannot be selected
when the menu is open.
1. Use the trackball to place the arrow in the DISPLAY MODE box at the top of
the screen.
2. Push the left button to select appropriate mode.
Radar:
+Plotter
Plotter:
Anchor watch:
Note: The radar echo related boxes (STBY/TX, PI line, target alarm, etc.) are
inoperative in the anchor watch and plotter modes.
1-12
Radar, Radar + Plotter, Anchor (Watch)
Radar, Radar + Plotter, Plotter
DISPLAY
XX*
DISPLAY MODE box
Radar display
Radar display, plotter display
Plotter display
Plotter display
* XX = display mode