Configure The Chassis Power Settings - NETGEAR M7100 Series User Manual

The following table describes the nonconfigurable Backplane-port packet-path data that is
displayed.
Table 61. Backplane-port Packet-path
Field
Direction
Packet-path

Configure the Chassis Power Settings


To configure the chassis power settings:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Click System > Chassis > Advanced > Chassis Power Configuration.
7.
Select the Power Module Redundancy Enable or Disable radio button.
8.
This specifies whether power redundancy mode is enabled or disabled.
Click the Apply button.
9.
M6100, M5300, and M7100 Series Managed Switches
Description
The path direction.
The packet path.
Chassis and Stacking
164