View Eps Power Modules And Eps Ports - NETGEAR M7100 Series User Manual

The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > Chassis > Advanced > Chassis Power Configuration
7.
The Chassis Power Configuration screen displays.
Scroll down to the Power Module section..
The following table describes the nonconfigurable Power Module data that is displayed.
Table 65. Power Modules
Field Description
Slot Power module number counted from left to right.
Type Power module type. Valid values are Fixed and Removable.
State Power module state. Possible states are as follows:
•
•
•
•
•
AC Power module input voltage category in volts. Possible values are
110V, 220V, and N/A. N/A specifies that power source input voltage
cannot be obtained.

View EPS Power Modules and EPS Ports


To display EPS ports:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
M6100, M5300, and M7100 Series Managed Switches
Operational
Failed
Not Present
Not Powered
Not Applicable
Chassis and Stacking
170