View The Client Summary - NETGEAR M7100 Series User Manual

Table 214. Port Summary (continued)
Field
Session Termination Action
Port Status

View the Client Summary


To view the client summary:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select Security > Port Authentication > Advanced > Client Summary.
7.
M6100, M5300, and M7100 Series Managed Switches
Description
The termination action set by the RADIUS server for the selected port.
This field is displayed only when the port control mode of the selected
port is not MAC-based. Possible values are as follows:
Default
•
Reauthenticate
•
If the termination action is set to default, then at the end of the session,
the client details are initialized. Otherwise re-authentication is
attempted.
The authorization status of the specified port. The possible values are
Authorized, Unauthorized, and N/A. If the port is in detached state, the
value is N/A because the port cannot participate in port access control.
Manage Device Security
593