View The Event Log - NETGEAR M7100 Series User Manual

M6100, M5300, and M7100 Series Managed Switches
Click the Login button.
6.
The web management interface menu displays.
Select Monitoring > Logs > Trap Logs.
7.
The screen also displays information about the traps that were sent.
Click the Clear button to clear all the counters. This resets all statistics for the trap logs to the
default values.
The following table describes the Trap Log information displayed on the screen.
Table 243. Trap Logs
Field
Number of Traps Since Last
Reset
Trap Log Capacity
Number of Traps since log
last viewed
Log
System Up Time
Trap

View the Event Log

You can view the event log, which contains error messages from the system. The event log is
not cleared on a system reset.
Description
The number of traps that occurred since the switch last rebooted.
The maximum number of traps stored in the log. If the number of traps
exceeds the capacity, the entries overwrite the oldest entries.
The number of traps that occurred since the traps were last displayed.
Displaying the traps by any method (terminal interface display, web display,
upload file from switch, and so on) causes this counter to be cleared to 0.
The sequence number of this trap.
The time when this trap occurred, expressed in days, hours, minutes and
seconds, since the last reboot of the switch.
Information identifying the trap.
Monitor the System
695