Configure Lldp-Med Global Settings - NETGEAR M7100 Series User Manual

The following table describes the LLDP Remote Device Inventory fields.
Table 47. LLDP Remote Device Inventory
Field
Port
Remote Device ID
Management Address
MAC Address
System Name
Remote Port ID

Configure LLDP-MED Global Settings

You can specify LLDP-MED parameters that are applied to the switch.

To configure LLDP-MED global settings:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > LLDP > LLDP-MED > Global Configuration.
7.
M6100, M5300, and M7100 Series Managed Switches
Description
The list of all the ports on which LLDP frame is enabled.
The remote device ID.
The advertised management address of the remote system.
The MAC address associated with the remote system.
Specifies model name of the remote device.
The port component associated with the remote system.
Configure System Information
136