Configure Udp Relay Interface Settings - NETGEAR M7100 Series User Manual

time. Relay time service (UDP port 37) packets
•
Other. If this option is selected, the UDP Port Other Value is enabled. This option
•
permits you to enter your own UDP port in UDP Port Other Value.
Use UDP Port Other Value to specify a UDP Destination Port that lies between 0 and
11.
65535.
Click the Add button.
12.
This creates an entry in UDP Relay Table with the specified configuration.
To remove all entries or a specified one from UDP Relay Table, click the Delete button.
13.
Click the Apply button.
14.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The Hit Count field displays the number of UDP packets hitting the UDP port.
To refresh the screen, click the Update button.

Configure UDP Relay Interface Settings


To configure UDP Relay Interface settings:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > Services > UDP Relay > UDP Relay Interface Configuration.
7.
M6100, M5300, and M7100 Series Managed Switches
Configure System Information
102