Configure The Private Vlan Port Mode - NETGEAR M7100 Series User Manual

Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select Security > Traffic Control > Private VLAN > Private VLAN Association
7.
Configuration.
Use Primary VLAN to select the primary VLAN ID of the domain.
8.
This is used to associate secondary VLANs with the domain.
Use Secondary VLAN(s) to display all the statically created VLANs (excluding the primary
9.
and default VLANs).
This control is used to associate VLANs with the selected primary VLAN.
To delete the IP subnet-based VLAN from the switch, click the Delete button.
10.
Click the Apply button.
11.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable information displayed on the screen.
Table 220. Private VLAN Association
Field
Isolated VLAN
Community VLAN(s)

Configure the Private VLAN Port Mode


To configure the private VLAN port mode:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
M6100, M5300, and M7100 Series Managed Switches
Description
The isolated VLAN associated with the selected primary VLAN.
The list of community VLANs associated with the selected primary
VLAN.
Manage Device Security
607