Configure Basic Poe - NETGEAR M7100 Series User Manual

Select the Interface with the information to view or configure. You can either:
8.
In the Go To Interface field, enter the interface in unit/slot/port format and click the Go
•
button. The entry corresponding to the specified interface is selected.
Select the check box from the list of Interfaces configured for DHCPv6 Relay
•
functionality.
In the Admin mode field, specify the DHCPv6 mode, either Enable or Disable, to configure
9.
DHCPv6 Relay functionality.
The default is Disable. DHCPv6 server and DHCPv6 relay functions are mutually
exclusive.
From the Relay Interface list, select an interface to reach a relay server.
10.
In the Destination IP Address, specify an IPv6 address to reach a relay server.
11.
In the Remote ID field, specify the relay agent information option.
12.
The remote ID is derived from the DHCPv6 server DUID and the relay interface number,
or it can be specified as a user-defined string.
Click the Apply button.
13.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

Configure Basic PoE


To configure basic PoE settings:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
M6100, M5300, and M7100 Series Managed Switches
Configure System Information
114