Configure A Management Vlan - NETGEAR M7100 Series User Manual

Managed switches
Hide thumbs Also See for M7100 Series:
Table of Contents

Advertisement

In the System Name field, type the name to identify this switch.
10.
You can use a name up to 255 characters in length. The factory default is blank.
In the System Location field, type the location of the switch.
11.
You can use a location up to 255 characters in length. The factory default is blank.
Enter the System Contact, the name of the contact person for this switch.
12.
You can use a contact name up to 255 characters in length. The factory default is blank.
In the SNTP mode field, select Enable or Disable.
13.
This specifies the state of the SNTP client. The default value is Disable, and the local
clock is used to get the time value.
Specify the address of the SNTP Server.
14.
Enter a text string of up to 64 characters containing the host name of an SNTP server.
The server address can be IPv4, IPv6, or a host name. The host name resolves into an IP
address each time an SNTP request is sent to it.
In the Designated Source Interface list, select Management VLAN or Service Port.
15.
This is the source interface that is used for SNMP trap, syslog, DNS, TACACS+,
RADIUS, sflow, and SNTP applications. By default, Management VLAN is used as the
source interface.
If you select Management VLAN as the source interface, the routing
Note:
mode for the selected VLAN must be enabled.
Click the Apply button.
16.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

Configure a Management VLAN

To do the initial Management VLAN configuration:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
M6100, M5300, and M7100 Series Managed Switches
Configure System Information
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M6100 seriesM5300 series

Table of Contents