View Dhcpv6 Bindings Information - NETGEAR M7100 Series User Manual

M6100, M5300, and M7100 Series Managed Switches
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > Services > DHCPv6 Server > DHCPv6 Interface Configuration.
7.
Select the Interface with the information to view or configure. You can either:
8.
a. In the Go To Interface field, enter the interface in unit/slot/port format and click the Go
button. The entry corresponding to the specified interface is selected.
b. Select the check box from the list of Interfaces configured for DHCPv6 server
functionality.
In the Admin mode list, select to Enable or Disable DHCPv6 mode to configure server
9.
functionality.
DHCPv6 server and DHCPv6 relay functions are mutually exclusive.
In the Pool Name field, specify the DHCPv6 pool containing stateless and/or prefix
10.
delegation parameters.
Rapid Commit is an optional parameter. In the Rapid Commit list, select to Enable or
11.
Disable allowing an abbreviated exchange between the client and server.
In the Preference field, specify the preference value used by clients to determine the
12.
preference between DHCPv6 servers.
Valid values are 0 to 4294967295. The default value is 0.
Click the Apply button.
13.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

View DHCPv6 Bindings Information

You can view entries in the DHCP Bindings table. After a client acquires IPv6 configuration
information from the DHCPv6 server, the server adds an entry to its database. The entry is
called a binding.
Configure System Information
108