Removing The Crankshaft; Checking The Oil Pump - Yamaha Grizzly550 User Manual

EAS28P1054

REMOVING THE CRANKSHAFT

1. Remove:
• Crankshaft "1"
TIP
• Remove the crankshaft with the crankcase
separating tool "2".
• Make sure the crankcase separating tool is
centered over the crankshaft.
ECA28P1029
NOTICE
• To protect the end of the crankshaft, place
an appropriate sized socket between the
crankcase separating tool bolt and the
crankshaft.
• Do not tap on the crankshaft.
Crankcase separating tool
90890-01135
Crankcase separator
YU-01135-B
1
EAS24960

CHECKING THE OIL PUMP

1. Check:
• Oil pump housing
• Oil pump housing cover
Cracks/damage/wear → Replace the defec-
tive part(s).
2. Measure:
• Inner-rotor-to-outer-rotor-tip clearance "a"
• Outer-rotor-to-oil-pump-housing clearance
"b"
• Oil-pump-housing-to-inner-rotor-and-outer-
rotor clearance "c"
Out of specification → Replace the oil pump.
CRANKSHAFT AND OIL PUMP
2
1. Inner rotor
2. Outer rotor
3. Oil pump housing
3. Check:
• Oil pump operation
Rough movement → Repeat steps (1) and
(2) or replace the defective part(s).
5-70
Inner-rotor-to-outer-rotor-tip
clearance
Less than 0.12 mm (0.0047 in)
Limit
0.20 mm (0.0079 in)
Outer-rotor-to-oil-pump-housing
clearance
0.090–0.170 mm (0.0035–0.0067
in)
Limit
0.24 mm (0.0094 in)
Oil-pump-housing-to-inner-and-
outer-rotor clearance
0.03–0.10 mm (0.0012–0.0039 in)
Limit
0.17 mm (0.0067 in)
techsparkstudio.com