Assembling The Clutch Housing; Installing The Clutch - Yamaha Grizzly550 User Manual

EAS28P1037

ASSEMBLING THE CLUTCH HOUSING

1. Install:
• Bearing "1"
Installed depth "a"
2.5–2.7 mm (0.10–0.11 in)
2. Clutch housing
2. Install:
• Oil seal "1" New
Installed depth "a"
0 mm (0 in)
2
2. Bearing housing
EAS28P1049

INSTALLING THE CLUTCH

1. Install:
• Clutch carrier assembly
New
• Nut "1"
a
1
2
a
New
1
5-59
Clutch carrier assembly nut
190 Nm (19.0 m·kg, 140 ft·lb)
ECA28P1033
NOTICE
The clutch carrier assembly nut has left-
handed threads. To tighten the clutch carrier
assembly nut, turn it counterclockwise.
TIP
Use a clutch holding tool "2" to hold the clutch
carrier assembly.
Universal clutch holder
90890-04086
YM-91042
New
1
2. Lock the threads with a drift punch.
3. Install:
• One-way clutch bearing
TIP
The one-way clutch bearing should be installed
in the clutch carrier assembly with the "OUT
SIDE" mark "a" facing toward the clutch housing.
4. Install:
• Dowel pins
• Gasket New
• Clutch housing assembly
Clutch housing assembly bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
CLUTCH
2