Yamaha Grizzly550 User Manual page 65

1. Coolant reservoir hose
2. Radiator fan motor breather hose
3. Differential case breather hose
4. EPS motor breather hose (YFM5FGP/YFM7FGP
only)
5. Ground lead
6. Coolant reservoir breather hose
7. Throttle cable
8. Fuel injector lead
9. Fuel tank drain hose
10. Final drive case breather hose
11. Speed sensor lead
12. AC magneto/crankshaft position sensor lead
13. Radiator outlet hose
14. Differential motor lead
15. EPS torque sensor lead (YFM5FGP/YFM7FGP
only)
16. Gear position switch lead
17. Reverse switch lead
18. Shift control cable
19. Starter motor lead
A. Face the end of the coolant reservoir breather
hose downward.
B. Route the fuel injector lead to the inside of the fuel
tank drain hose.
C. Pass the AC magneto/crankshaft position sensor
lead through the holder.
D. Fasten the radiator outlet hose to the frame with
the plastic band, making sure to face the end of the
band inward.
E. Route the EPS motor breather hose under the
coolant reservoir hose. (YFM5FGP/YFM7FGP
only)
F. Place the EPS torque sensor lead
(YFM5FGP/YFM7FGP only) and differential motor
lead in the holder, and then insert the ends of the
holder into the hole in the stay on the frame.
G. Route the differential case breather hose to the
inside of the frame.
H. Fasten the differential case breather hose to the
frame with the plastic band, making sure to face
the end of the band inward.
I. Attach the ground lead terminal to the frame using
the bolt.
J. Route the radiator fan motor breather hose and
differential case breather hose to the inside of the
radiator outlet hose.
K. Face the end of the plastic band inward.
L. Route the fuel tank drain hose as shown in the
illustration.
M. Pass the speed sensor lead, AC
magneto/crankshaft position sensor lead, and final
drive case breather hose through the guide in the
order listed.
N. Route the speed sensor lead, AC
magneto/crankshaft position sensor lead, and final
drive case breather hose to the right of the reverse
switch.
O. Route the final drive case breather hose above the
reverse switch lead and ground leads.
P. Route the shift control cable under the gear
position switch lead, speed sensor lead, and AC
magneto/crankshaft position sensor lead.
Q. YFM5FGP/YFM7FGP
R. YFM5FG/YFM7FG
2-36
CABLE ROUTING
techsparkstudio.com