Yamaha Grizzly550 User Manual page 166

L LLL L LLL L L LLL L L LLL L
4. Install:
• Left handlebar switch
• Rear brake master cylinder "1"
• Rear brake master cylinder holder "2"
Rear brake master cylinder hold-
er bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
TIP
• Align the end of the brake master cylinder hold-
er with the punch mark "a" on the handlebar.
• The "UP" mark "b" on the brake master cylinder
holder should face up.
• Install the brake master cylinder holder so that
the gaps between the brake master cylinder
and the brake master cylinder holder are
equal.
1
2
b
5. Install:
• Front brake master cylinder "1"
• Front brake master cylinder holder "2"
Front brake master cylinder hold-
er bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
TIP
• Align the end of the brake master cylinder hold-
er with the punch mark "a" on the handlebar.
• The "UP" mark "b" on the brake master cylinder
holder should face up.
L LLL L L LLL L LLL
a
4-47
• Install the brake master cylinder holder so that
the gaps between the brake master cylinder
and the brake master cylinder holder are
equal.
1
a
6. Install:
• Throttle lever assembly "1"
• Throttle lever assembly holder
TIP
Align the projection "a" on the throttle lever as-
sembly with the end of the brake master cylinder
holder "b".
1
HANDLEBAR
2
b
b
a