Installing The Middle Drive Shaft - Yamaha Grizzly550 User Manual

1
L LLL L LLL L L LLL L L LLL L
3. Install:
• Middle driven pinion gear shim(s) "1"
• Bearing housing
TIP
Install the shim(s) so that the tabs are positioned
as shown in the illustration.
1
4. Install:
• Rear drive shaft yoke (middle gear side) "1"
• Washer
• Rear drive shaft yoke nut (middle gear side)
"2"
Rear drive shaft yoke nut (middle
gear side)
150 Nm (15.0 m·kg, 110 ft·lb)
LOCTITE®
TIP
Use the coupling gear/middle shaft tool "3" to
hold the coupling yoke.
Coupling gear/middle shaft tool
90890-01229
Gear holder
YM-01229
2
L LLL L L LLL L LLL
1
5-85
5. Install:
• Front drive shaft yoke (middle gear side) "1"
• Washer
• Front drive shaft yoke nut (middle gear side)
"2"
Front drive shaft yoke nut (mid-
dle gear side)
115 Nm (11.5 m·kg, 85 ft·lb)
TIP
Use the coupling gear/middle shaft tool "3" to
hold the coupling yoke.
Coupling gear/middle shaft tool
90890-01229
Gear holder
YM-01229
EAS28P1067

INSTALLING THE MIDDLE DRIVE SHAFT

1. Install:
• Circlip
• Middle driven gear "1"
(to the middle drive shaft "2")
Installed depth of middle driven
gear "a"
24.7–24.9 mm (0.97–0.98 in)
MIDDLE GEAR
1
2
3
1
2
3