Yamaha Grizzly550 User Manual page 97

1
8. Drain:
• Coolant
(from the engine and radiator)
9. Check:
• Coolant drain bolt "1"
Damage → Replace.
10.Install:
• Copper washer "2" New
• Coolant drain bolt
Coolant drain bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
11.Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Recommended antifreeze
High-quality ethylene glycol an-
tifreeze containing corrosion in-
hibitors for aluminum engines
Mixing ratio
1:1 (antifreeze:water)
Radiator capacity (including all
routes)
1.99 L (2.10 US qt, 1.75 Imp.qt)
Coolant reservoir capacity (up to
the maximum level mark)
0.24 L (0.25 US qt, 0.21 Imp.qt)
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
EWA13040
• If coolant splashes in your eyes, thorough-
2
• If coolant splashes on your clothes, quickly
• If coolant is swallowed, induce vomiting
ECA13480
NOTICE
• Adding water instead of coolant lowers the
• Use only distilled water. However, if dis-
• If coolant comes into contact with painted
• Do not mix different types of antifreeze.
12.Fill:
13.Install:
14.Bleed:
M
a. Remove the V-belt cooling exhaust duct "1".
3-18
WARNING
ly wash them with water and consult a doc-
tor.
wash it away with water and then with soap
and water.
and get immediate medical attention.
antifreeze content of the coolant. If water is
used instead of coolant check, and if nec-
essary, correct the antifreeze concentra-
tion of the coolant.
tilled water is not available, soft water may
be used.
surfaces, immediately wash them with wa-
ter.
• Coolant reservoir
(with the recommended coolant to the maxi-
mum level mark "a")
• Coolant reservoir cap "1"
a
• Coolant system
MMM M MMM M M MMM M M MMM M
ENGINE
1
M MMM M M MMM M MMM
techsparkstudio.com