Yamaha Grizzly550 User Manual page 194

b
1
a
L LLL L LLL L L LLL L L LLL L
2. Install:
• V-belt cooling exhaust duct joint "1"
• V-belt cooling exhaust duct "2"
M MMM M MMM M M MMM M M MMM M
a. Position the V-belt cooling exhaust duct joint
with its arrow mark "a" pointing toward the en-
gine.
b. Align the projection on the V-belt cooling ex-
haust duct joint with the projection on the
drive belt case in the area "b" shown in the il-
lustration.
c. Align the screw head with the arrow mark "a"
on the V-belt cooling exhaust duct joint in the
area "c" shown in the illustration.
d. Align the projection on the V-belt cooling ex-
haust duct with the projection on the V-belt
cooling exhaust duct joint in the area "d"
shown in the illustration.
e. Align the screw head with the rib on the V-belt
cooling exhaust duct in the area "e" shown in
the illustration.
d,e
2
c
L LLL L L LLL L LLL
M MMM M M MMM M MMM
ENGINE REMOVAL
d
a
b
c
L LLL L LLL L L LLL L
5-3
2
1
e
L LLL L L LLL L L LLL L LLL