Table of Contents
Advertisement
Configuring DRO-250i
3.5.2
MULTICAST - Multicast Routing
If user wants to use any multicast application across the network, then
Multicast Routing should be used. To use multicast routing on a particular
interface, user should first enable Multicast on that interface. If user does
not enable Multicast on any interface, then multicast routing can not be
enabled on that interface.
Click on MULTICAST > Multicast Routing to get the web page as
shown below:
User can enable or disable multicast routing on any interface with the help
of enable or disable option.
Candidate RP : Choose the interface which should become Candidate
RP.
Candidate RP Priority: It is priority which is set for RP (Rendezvous
Point). Lesser number will be higher priority.
Candidate BSR : Choose the interface which should become Candidate
BSR.
DRO-250i User Manual
92
Advertisement
Table of Contents
