D-Link DRO-250i User Manual page 51

Configuring DRO-250i
Route Entries: This table will show all the routes user configures for all
the interfaces. The colour scheme will tell which route is active and which
is not.
1-Entries with yellow colour are active entries (the interface for which the
user has entered these entries is up).
2-Entries with grey colour are inactive entries (the interface for which the
user has entered these entries is down).
RIP Settings
RIP page allows user to configure the RIP Routing Protocol. In the web
page, user can also customize RIP settings for every interface.
RIP Version:
RIP version can be either 1 or 2.
Redistribute:
Static, Connected and OSPF routes can be redistributed into the RIP table.
RIP Daemon:
Start or Stop the RIP Daemon.
DRO-250i User Manual
50