Nat - Nat Configuration - D-Link DRO-250i User Manual

3.4.3.2

NAT - NAT Configuration

Click on Advanced > NAT> NAT Configuration to get the web page as
shown below:
NAT - Enable or Disable the NAT Configuration for the WAN Interface
selected. This
Configuration entry made. To Enable/Disable NAT on the specific
Interface, make the configuration in the Interface Configuration webPage.
WAN Interface- Select the WAN Interface from the drop-down menu on
which the NAT Configuration entry has to be made.
NAT Type - Select the type of NAT to be applied on the interface from
the drop-down menu. The types that can be configured are:
Many-To-One: Any IP from Private network passing through the
•
NAT enabled interface are mapped to the single Global IP specified.
Instead of specifying the global IP, Interface checkbox can be
selected. This makes the Interface IP to be the Global IP to which all
field only Enable/Disable
Introduction to DRO-250i
the particular NAT
DRO-250i User Manual
61