D-Link DRO-250i User Manual page 29

Configuring DRO-250i
five different ISP profiles on this page and depending upon the choice
he/she can configure channels with those profiles. Profiles are independent
of channels; user can configure any profile on any of the channels. ADD-
button enables the user to add the profile into the profiles table. APPLY-
button enables the user to apply the selected configuration on the selected
channels. To apply a particular configuration from the saved profiles user
should click on View and select the channel and click Apply. Selection of
channel depends upon the connection type the user chooses from the
ISDN connections page. User can choose either B1 or B2 only when
connection type is 2-64K dialout. For all other Connection types B1
channel is selected automatically. When the Connection type is 128kbps
dial out/dial in only Channel 1(B1) will be enabled .User can see the
status of two channels in the status page. Profile table will show which
profile has been selected for which channel. This page only configures the
particular channel with ISP profile. To initiate a dial go to ISDN STATUS
page and click Dial .
Local IP address:
Fill in the fixed IP address given by the ISP provider. It is in the form of
four IP octets separated by a dot (x.x.x.x).
Unnumbered:
This interface can be configured as an Unnumbered interface.
Net mask:
Enter the subnet mask in dotted decimal (i.e. A.B.C.D) format
Remote IP address:
Fill in the fixed IP address of the remote server given by the ISP. It is in
the form of four IP octets separated by a dot (x.x.x.x)..
Area Code:
It provides the Area Code of the ISP. e.g. area code of user is 080 and
ISP's area code is 022, then user should enter 22 in the area code field.
DRO-250i User Manual
28