Table of Contents
Advertisement
Introduction to DRO-250i
There exists a one-to-one relationship between the primary and backup
interface.
Following
rules
apply
for
backup
configuration:
1. Cannot configure a single interface to act as backup for two or more primary
interfaces.
2. If an interface is configured as a backup interface it cannot be made a primary
interface.
3. When auto backup is selected all configurations other than Virtual Server and
VPN made for a backup interface will be applied automatically, like the connection
type for the WAN interface, Static Routes configured on this interface, NAT
configured on this interface, etc.
4. An interface cannot be connected manually if it is made a backup interface in
auto mode.
5. An interface cannot be connected manually if it is made a backup interface in
manual mode and its primary interface is connected.
DRO-250i User Manual
47
Advertisement
Table of Contents
